How to Install the New Improved Already Extended Pistons on Your Bestar Wall Bed

Introduction

Installing the new improved already extended pistons on your Bestar wall bed can enhance its functionality and longevity. This guide provides a comprehensive step-by-step process to install these pistons safely and effectively.

Tools Required

• Screwdrivers (Phillips and flathead)
• Adjustable wrench
• Allen wrenches
• Pliers
• Rubber mallet
• Safety goggles
• Work gloves

Safety Precautions

1. Read the Bestar Manual: Always refer to the Bestar instructions before starting.
2. Clear the Area: Ensure the area around the wall bed is clear of obstacles.
3. Use Proper Tools: Use the recommended tools to avoid damage.
4. Wear Safety Gear: Use safety goggles and work gloves to protect yourself from potential injuries.
5. Have a Helper: Bestar wall beds can be heavy. It’s advisable to have someone assist you.

Installation Guide

Preparation

1. Download the Manual: Click here to download the detailed manual.
2. Watch the Assembly Video: For visual guidance, you can watch a short assembly video here.

Step-by-Step Instructions

1. Remove the Molding

   • If your model has molding, remove the molding carefully to access the bed frame.
   • Remove the molding full-face to expose the bindings facades.

2. Remove the Bindings Facades

   • Remove the last lath and the 8th lath from the bottom to access the internal components.

3. Open the Bed

   • Open the bed and place an object to keep it in a semi-closed position. This ensures stability during the installation process.

4. Remove the Facades

   • Carefully remove the facades to expose the internal mechanisms.

5. Open the Leg

   • Fully open the bed and extend the leg for easier access to the pistons.

6. Remove the Toe Kick

   • Remove the toe kick to access the screws and components beneath it.

7. Uninstall the Leg

   • Remove the leg from its position to allow more room for piston installation.

8. Remove the Stop Panel Screws

   • Unscrew the stop panel to gain full access to the pistons.

9. Remove the Stop Panel

   • Take off the stop panel to expose the moveable parts of the bed.

10. Move the Moveable Part

    • Move the moveable part towards the interior of the bed frame.

11. Remove the Upper Cylinder Bolt

    • Remove the bolt securing the upper part of the cylinder.

12. Lower the Moveable Part

    • Lower the moveable part to the ground to relieve tension on the cylinder.

13. Remove the Lower Cylinder Bolt

    • Remove the bolt securing the lower part of the cylinder.

14. Change the Cylinder

    • Replace the old cylinder with the new improved already extended piston.

15. Reinstall Cylinder Bolts

    • Secure the new piston by reinstalling the bolts on the upper and lower parts of the cylinder.

Reassembly

1. Reassemble the Bed
   • Follow the steps in reverse order to reassemble the bed. Ensure all components are securely fastened and properly aligned.
2. Reinstall the Stop Panel
   • Reattach the stop panel and secure it with screws.
3. Reinstall the Leg
   • Put the leg back in its original position and secure it.
4. Replace the Toe Kick
   • Reinstall the toe kick.
5. Close the Bed
   • Carefully close the bed and ensure it functions properly with the new pistons.
6. Reattach the Facades
   • Reattach the facades to the bed frame.
7. Replace the Bindings Facades
   • Reinstall the bindings facades and laths.
8. Reinstall the Molding
   • Reattach the molding to complete the installation.

Conclusion

Installing the new improved already extended pistons on your Bestar wall bed requires careful attention to detail and adherence to safety guidelines. By following this step-by-step guide, you can enhance the functionality of your wall bed. If you encounter any difficulties or uncertainties, consult the Bestar manual or seek professional assistance.

Keep this information for future reference.